FMS interface wiki (9164-10)

All the information Related to the FMS interface

Intruduction to the CANgo FMS interface
The CANGO FMS interface is an gateway that provides vehicle specific information (fuel consumption, fuel level, odometer, rpm, pedal position, etc...) on it...
Mon, 1 Oct, 2018 at 1:05 PM
How the CANgo FMS interface works
The vehicle computers (EDC, Retarder, Opticruise, EBS, ABS etc.) all communicate via an on-board CAN bus. The CANGO FMS interface is an electronic device th...
Mon, 1 Oct, 2018 at 1:21 PM
Power on the CANgo FMS interface
The CANgo FMS interface device has many ports (inputs and outputs), one of the most important, of course, is the Power input since without it the unit will ...
Mon, 1 Oct, 2018 at 1:39 PM
Data input - CAN1 wires / CAN CANgoclick
The CAN bus input is the input most used on the data of a vehicle with the FMS interface, most solution work with this input, being used to read the J1939...
Mon, 1 Oct, 2018 at 6:00 PM
Data input - J1708 wires / J1708 CANgoclick
In some vehicles it is possible to find J1708 networks that contain some or all data of the vehicle, for example on Volvo, Feigthliner and Renault trucks. ...
Mon, 1 Oct, 2018 at 10:46 PM
Data input - K-Line and L-Line
The K-Line and L-line wires can be used to read data on old vehicles that do not have CAN network (e.g. Dacia cars). Also the K-line is one of the necessary...
Mon, 1 Oct, 2018 at 10:53 PM
Data output - CAN2 wires / FMS standard output
The data collected by CANgo FMS interface can be outputted by the RS232 serial port/Bluetooth or CAN output, both are activated at all time. In this articl...
Mon, 1 Oct, 2018 at 10:54 PM
Data output - Serial Port
 The data collected by CANgo FMS interface can be outputted by the RS232 serial port/Bluetooth or CAN output, both are activated at all time. The serial com...
Wed, 26 Sep, 2018 at 4:57 PM
Led beahviour
The led oof teh FMS interface is an indicator of the working state of the FMS interface. it is located on the Front of the device. The LED Behaviour o...
Tue, 2 Oct, 2018 at 7:16 PM
How to Configure the FMS interface
The FMS interface can be configurable with two methods, via serial commands or by using the CANfigurator software. On the table bellow is a resume of the di...
Tue, 2 Oct, 2018 at 11:56 AM