The vehicle computers (EDC, Retarder, Opticruise, EBS, ABS etc.) all communicate via an on-board CAN bus. The CANGO FMS interface is an electronic device that can tap the On-board CAN bus network or other data networks to read the data and translate the data into standard FMS (J1939) data or Serial ASCII data.


The CANgo FMS interface have the capacity to: 

  1. Translate the different CAN bus protocols from different vehicles into FMS standard or RS232 output;
  2. Read simultaneously various Data networks and joining all the data in one output;
  3. Act as a firewall, so the vehicle data network cannot be interfered;
  4. Filter data - not all data is made available.